Şimdi Ara

Xiaomi Mi WiFi 3G Router OpenWrt Kurulumu, SAMBA Paylaşımı (NAS Kurulumu), Torrent Client Kurulumu (22. sayfa)

Daha Fazla
Bu Konudaki Kullanıcılar: Daha Az
1 Misafir - 1 Masaüstü
5 sn
1.168
Cevap
42
Favori
64.823
Tıklama
Daha Fazla
İstatistik
  • Konu İstatistikleri Yükleniyor
11 oy
Öne Çıkar
Sayfa: önceki 2021222324
Sayfaya Git
Git
sonraki
Giriş
Mesaj
  • quote:

    Orijinalden alıntı: whiskerry

    Komutları girdikten sonra çıkan sonuçlar;

    root@OpenWrt:~# lsusb -t
    /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci-mtk/1p, 5000M
    |__ Port 1: Dev 2, If 0, Class=Mass Storage, Driver=uas, 5000M
    /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci-mtk/2p, 480M
    root@OpenWrt:~# lsusb -v

    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Device Descriptor:
    bLength 18
    bDescriptorType 1
    bcdUSB 2.00
    bDeviceClass 9 Hub
    bDeviceSubClass 0 Unused
    bDeviceProtocol 1 Single TT
    bMaxPacketSize0 64
    idVendor 0x1d6b Linux Foundation
    idProduct 0x0002 2.0 root hub
    bcdDevice 4.14
    iManufacturer 3 Linux 4.14.95 xhci-hcd
    iProduct 2 xHCI Host Controller
    iSerial 1 1e1c0000.xhci
    bNumConfigurations 1
    Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 25
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0xe0
    Self Powered
    Remote Wakeup
    MaxPower 0mA
    Interface Descriptor:
    bLength 9
    bDescriptorType 4
    bInterfaceNumber 0
    bAlternateSetting 0
    bNumEndpoints 1
    bInterfaceClass 9 Hub
    bInterfaceSubClass 0 Unused
    bInterfaceProtocol 0 Full speed (or root) hub
    iInterface 0
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x81 EP 1 IN
    bmAttributes 3
    Transfer Type Interrupt
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0004 1x 4 bytes
    bInterval 12
    Hub Descriptor:
    bLength 9
    bDescriptorType 41
    nNbrPorts 2
    wHubCharacteristic 0x0009
    Per-port power switching
    Per-port overcurrent protection
    TT think time 8 FS bits
    bPwrOn2PwrGood 10 * 2 milli seconds
    bHubContrCurrent 0 milli Ampere
    DeviceRemovable 0x00
    PortPwrCtrlMask 0xff
    Hub Port Status:
    Port 1: 0000.0100 power
    Port 2: 0000.0100 power
    Device Status: 0x0001
    Self Powered

    Bus 002 Device 002: ID 0bc2:231a Seagate RSS LLC Expansion Portable
    Device Descriptor:
    bLength 18
    bDescriptorType 1
    bcdUSB 3.00
    bDeviceClass 0 (Defined at Interface level)
    bDeviceSubClass 0
    bDeviceProtocol 0
    bMaxPacketSize0 9
    idVendor 0x0bc2 Seagate RSS LLC
    idProduct 0x231a Expansion Portable
    bcdDevice 7.08
    iManufacturer 1 Seagate
    iProduct 2 Expansion
    iSerial 3 NAA33GT4
    bNumConfigurations 1
    Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 121
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0x80
    (Bus Powered)
    MaxPower 224mA
    Interface Descriptor:
    bLength 9
    bDescriptorType 4
    bInterfaceNumber 0
    bAlternateSetting 0
    bNumEndpoints 2
    bInterfaceClass 8 Mass Storage
    bInterfaceSubClass 6 SCSI
    bInterfaceProtocol 80 Bulk-Only
    iInterface 0
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x81 EP 1 IN
    bmAttributes 2
    Transfer Type Bulk
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0400 1x 1024 bytes
    bInterval 0
    bMaxBurst 15
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x02 EP 2 OUT
    bmAttributes 2
    Transfer Type Bulk
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0400 1x 1024 bytes
    bInterval 0
    bMaxBurst 15
    Interface Descriptor:
    bLength 9
    bDescriptorType 4
    bInterfaceNumber 0
    bAlternateSetting 1
    bNumEndpoints 4
    bInterfaceClass 8 Mass Storage
    bInterfaceSubClass 6 SCSI
    bInterfaceProtocol 98
    iInterface 0
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x01 EP 1 OUT
    bmAttributes 2
    Transfer Type Bulk
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0400 1x 1024 bytes
    bInterval 0
    bMaxBurst 0
    Command pipe (0x01)
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x82 EP 2 IN
    bmAttributes 2
    Transfer Type Bulk
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0400 1x 1024 bytes
    bInterval 0
    bMaxBurst 0
    MaxStreams 32
    Status pipe (0x02)
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x83 EP 3 IN
    bmAttributes 2
    Transfer Type Bulk
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0400 1x 1024 bytes
    bInterval 0
    bMaxBurst 15
    MaxStreams 32
    Data-in pipe (0x03)
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x04 EP 4 OUT
    bmAttributes 2
    Transfer Type Bulk
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0400 1x 1024 bytes
    bInterval 0
    bMaxBurst 7
    MaxStreams 32
    Data-out pipe (0x04)
    Binary Object Store Descriptor:
    bLength 5
    bDescriptorType 15
    wTotalLength 22
    bNumDeviceCaps 2
    USB 2.0 Extension Device Capability:
    bLength 7
    bDescriptorType 16
    bDevCapabilityType 2
    bmAttributes 0x00000f0e
    Link Power Management (LPM) Supported
    SuperSpeed USB Device Capability:
    bLength 10
    bDescriptorType 16
    bDevCapabilityType 3
    bmAttributes 0x00
    wSpeedsSupported 0x000e
    Device can operate at Full Speed (12Mbps)
    Device can operate at High Speed (480Mbps)
    Device can operate at SuperSpeed (5Gbps)
    bFunctionalitySupport 1
    Lowest fully-functional device speed is Full Speed (12Mbps)
    bU1DevExitLat 10 micro seconds
    bU2DevExitLat 32 micro seconds
    Device Status: 0x0000
    (Bus Powered)

    Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
    Device Descriptor:
    bLength 18
    bDescriptorType 1
    bcdUSB 3.00
    bDeviceClass 9 Hub
    bDeviceSubClass 0 Unused
    bDeviceProtocol 3
    bMaxPacketSize0 9
    idVendor 0x1d6b Linux Foundation
    idProduct 0x0003 3.0 root hub
    bcdDevice 4.14
    iManufacturer 3 Linux 4.14.95 xhci-hcd
    iProduct 2 xHCI Host Controller
    iSerial 1 1e1c0000.xhci
    bNumConfigurations 1
    Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 31
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0xe0
    Self Powered
    Remote Wakeup
    MaxPower 0mA
    Interface Descriptor:
    bLength 9
    bDescriptorType 4
    bInterfaceNumber 0
    bAlternateSetting 0
    bNumEndpoints 1
    bInterfaceClass 9 Hub
    bInterfaceSubClass 0 Unused
    bInterfaceProtocol 0 Full speed (or root) hub
    iInterface 0
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x81 EP 1 IN
    bmAttributes 3
    Transfer Type Interrupt
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0004 1x 4 bytes
    bInterval 12
    bMaxBurst 0
    Hub Descriptor:
    bLength 12
    bDescriptorType 42
    nNbrPorts 1
    wHubCharacteristic 0x0009
    Per-port power switching
    Per-port overcurrent protection
    bPwrOn2PwrGood 10 * 2 milli seconds
    bHubContrCurrent 0 milli Ampere
    bHubDecLat 0.0 micro seconds
    wHubDelay 0 nano seconds
    DeviceRemovable 0x00
    Hub Port Status:
    Port 1: 0000.0203 5Gbps power U0 enable connect
    Binary Object Store Descriptor:
    bLength 5
    bDescriptorType 15
    wTotalLength 15
    bNumDeviceCaps 1
    SuperSpeed USB Device Capability:
    bLength 10
    bDescriptorType 16
    bDevCapabilityType 3
    bmAttributes 0x00
    wSpeedsSupported 0x0008
    Device can operate at SuperSpeed (5Gbps)
    bFunctionalitySupport 3
    Lowest fully-functional device speed is SuperSpeed (5Gbps)
    bU1DevExitLat 0 micro seconds
    bU2DevExitLat 0 micro seconds
    Device Status: 0x0001
    Self Powered
    root@OpenWrt:~# ls -l /dev/sd*
    ls: /dev/sd*: No such file or directory
    root@OpenWrt:~#
    Bende aynı komutlar şöyle sonuç verdi
    Farklı olarak bendeki 3TB Seagate diski usb-storage olarak görmüş, sendekini de UAS olarak görmüş. Son komutun sonucundan da senin diski sda1 olarak mount etmediği anlaşılılıyor.
    UAS paketini yükledin mi?


    root@MiWiFi_3G:~# lsusb -t
    /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci-mtk/1p, 5000M
    |__ Port 1: Dev 2, If 0, Class=Mass Storage, Driver=usb-storage, 5000M
    /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci-mtk/2p, 480M
    root@MiWiFi_3G:~# lsusb -v

    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Device Descriptor:
    bLength 18
    bDescriptorType 1
    bcdUSB 2.00
    bDeviceClass 9 Hub
    bDeviceSubClass 0 Unused
    bDeviceProtocol 1 Single TT
    bMaxPacketSize0 64
    idVendor 0x1d6b Linux Foundation
    idProduct 0x0002 2.0 root hub
    bcdDevice 4.14
    iManufacturer 3 Linux 4.14.95 xhci-hcd
    iProduct 2 xHCI Host Controller
    iSerial 1 1e1c0000.xhci
    bNumConfigurations 1
    Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 25
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0xe0
    Self Powered
    Remote Wakeup
    MaxPower 0mA
    Interface Descriptor:
    bLength 9
    bDescriptorType 4
    bInterfaceNumber 0
    bAlternateSetting 0
    bNumEndpoints 1
    bInterfaceClass 9 Hub
    bInterfaceSubClass 0 Unused
    bInterfaceProtocol 0 Full speed (or root) hub
    iInterface 0
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x81 EP 1 IN
    bmAttributes 3
    Transfer Type Interrupt
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0004 1x 4 bytes
    bInterval 12
    Hub Descriptor:
    bLength 9
    bDescriptorType 41
    nNbrPorts 2
    wHubCharacteristic 0x0009
    Per-port power switching
    Per-port overcurrent protection
    TT think time 8 FS bits
    bPwrOn2PwrGood 10 * 2 milli seconds
    bHubContrCurrent 0 milli Ampere
    DeviceRemovable 0x00
    PortPwrCtrlMask 0xff
    Hub Port Status:
    Port 1: 0000.0100 power
    Port 2: 0000.0100 power
    Device Status: 0x0001
    Self Powered

    Bus 002 Device 002: ID 0bc2:a0a4 Seagate RSS LLC Backup Plus Desktop Drive
    Device Descriptor:
    bLength 18
    bDescriptorType 1
    bcdUSB 3.00
    bDeviceClass 0 (Defined at Interface level)
    bDeviceSubClass 0
    bDeviceProtocol 0
    bMaxPacketSize0 9
    idVendor 0x0bc2 Seagate RSS LLC
    idProduct 0xa0a4 Backup Plus Desktop Drive
    bcdDevice 1.00
    iManufacturer 2 Seagate
    iProduct 3 Backup+ Desk
    iSerial 1 NA5JQV6H
    bNumConfigurations 1
    Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 44
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0xc0
    Self Powered
    MaxPower 0mA
    Interface Descriptor:
    bLength 9
    bDescriptorType 4
    bInterfaceNumber 0
    bAlternateSetting 0
    bNumEndpoints 2
    bInterfaceClass 8 Mass Storage
    bInterfaceSubClass 6 SCSI
    bInterfaceProtocol 80 Bulk-Only
    iInterface 0
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x81 EP 1 IN
    bmAttributes 2
    Transfer Type Bulk
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0400 1x 1024 bytes
    bInterval 0
    bMaxBurst 15
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x02 EP 2 OUT
    bmAttributes 2
    Transfer Type Bulk
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0400 1x 1024 bytes
    bInterval 0
    bMaxBurst 15
    Binary Object Store Descriptor:
    bLength 5
    bDescriptorType 15
    wTotalLength 22
    bNumDeviceCaps 2
    USB 2.0 Extension Device Capability:
    bLength 7
    bDescriptorType 16
    bDevCapabilityType 2
    bmAttributes 0x00000002
    Link Power Management (LPM) Supported
    SuperSpeed USB Device Capability:
    bLength 10
    bDescriptorType 16
    bDevCapabilityType 3
    bmAttributes 0x00
    wSpeedsSupported 0x000e
    Device can operate at Full Speed (12Mbps)
    Device can operate at High Speed (480Mbps)
    Device can operate at SuperSpeed (5Gbps)
    bFunctionalitySupport 1
    Lowest fully-functional device speed is Full Speed (12Mbps)
    bU1DevExitLat 10 micro seconds
    bU2DevExitLat 2047 micro seconds
    Device Status: 0x0001
    Self Powered

    Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
    Device Descriptor:
    bLength 18
    bDescriptorType 1
    bcdUSB 3.00
    bDeviceClass 9 Hub
    bDeviceSubClass 0 Unused
    bDeviceProtocol 3
    bMaxPacketSize0 9
    idVendor 0x1d6b Linux Foundation
    idProduct 0x0003 3.0 root hub
    bcdDevice 4.14
    iManufacturer 3 Linux 4.14.95 xhci-hcd
    iProduct 2 xHCI Host Controller
    iSerial 1 1e1c0000.xhci
    bNumConfigurations 1
    Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 31
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0xe0
    Self Powered
    Remote Wakeup
    MaxPower 0mA
    Interface Descriptor:
    bLength 9
    bDescriptorType 4
    bInterfaceNumber 0
    bAlternateSetting 0
    bNumEndpoints 1
    bInterfaceClass 9 Hub
    bInterfaceSubClass 0 Unused
    bInterfaceProtocol 0 Full speed (or root) hub
    iInterface 0
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x81 EP 1 IN
    bmAttributes 3
    Transfer Type Interrupt
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0004 1x 4 bytes
    bInterval 12
    bMaxBurst 0
    Hub Descriptor:
    bLength 12
    bDescriptorType 42
    nNbrPorts 1
    wHubCharacteristic 0x0009
    Per-port power switching
    Per-port overcurrent protection
    bPwrOn2PwrGood 10 * 2 milli seconds
    bHubContrCurrent 0 milli Ampere
    bHubDecLat 0.0 micro seconds
    wHubDelay 0 nano seconds
    DeviceRemovable 0x00
    Hub Port Status:
    Port 1: 0000.0203 5Gbps power U0 enable connect
    Binary Object Store Descriptor:
    bLength 5
    bDescriptorType 15
    wTotalLength 15
    bNumDeviceCaps 1
    SuperSpeed USB Device Capability:
    bLength 10
    bDescriptorType 16
    bDevCapabilityType 3
    bmAttributes 0x00
    wSpeedsSupported 0x0008
    Device can operate at SuperSpeed (5Gbps)
    bFunctionalitySupport 3
    Lowest fully-functional device speed is SuperSpeed (5Gbps)
    bU1DevExitLat 0 micro seconds
    bU2DevExitLat 0 micro seconds
    Device Status: 0x0001
    Self Powered
    root@MiWiFi_3G:~# ls -l /dev/sd*
    brw------- 1 root root 8, 0 Jan 1 1970 /dev/sda
    brw------- 1 root root 8, 1 May 11 13:46 /dev/sda1
    root@MiWiFi_3G:~#




  • CXath1 C kullanıcısına yanıt
    https yerine http olarak denediniz mi?
  • quote:

    Orijinalden alıntı: CXath1

    Arkadaşlar openwrt kurmaya karar verdim ancak saatlerdir uğraşıyorum şu linke girmiyor.https://d.miwifi.com/rom/ssh
    Birara ekran geldi. Kullanıcı adı şifremi girdim. Öyle kaldı.
    WhatsApp bilginizi özel mesaj olarak atarsanız uzaktan bağlantıyla çözmeye çalışalım.
  • ysonmezer kullanıcısına yanıt
    UAS paketini de yükledim ama maalesef olmuyor ilk sayfadaki verdiğiniz bütün komutları denedim ama olmuyor. Büyük ihtimalle HDD'ye yeterli güç gitmediğini tahmin ediyorum. Bendeki USB kablosu 1. resimde gösterilen kablodan, ama çift USB kabloları var bildiğim birde onları deneyeceğim birinden güç alıyor diğerinden veri aktarımı sağlıyor. Siz 3,5 inch HDD kullanıyorsunuz ben 2,5 inch HDD kullanıyorum benim HDD gücü routerdan alıyor sanırım oda yetmiyor siz harici güç kaynağı kullanıyorsunuz.

    @-ForeverY- arkadaşın dediği de olabilir ben USB 2.0 dosyalarını da yükledim ama olmadı. Yeni bir kablo alacağım

    Xiaomi Mi WiFi 3G Router OpenWrt Kurulumu, SAMBA Paylaşımı (NAS Kurulumu), Torrent Client Kurulumu
    Xiaomi Mi WiFi 3G Router OpenWrt Kurulumu, SAMBA Paylaşımı (NAS Kurulumu), Torrent Client Kurulumu




  • Bu kablo 2 ayrı USB portundan daha fazla akım çekmek içindir. Ama Routerda 1 port var. Siz diğerine Power adaptör mü takacksınız.

    < Bu ileti DH mobil uygulamasından atıldı >
  • ysonmezer kullanıcısına yanıt
    evet adaptör takacağım aklıma başka bişey gelmiyor
  • Evet denemeye dener

    < Bu ileti DH mobil uygulamasından atıldı >
  • ysonmezer kullanıcısına yanıt
    Birde openwrt forumlarında soracağım oradan belki bilen veyahut benim sorunumun aynısı başkasının başına gelmiştir...
    Ayrıca router’ın usb çıkış gücünü ölçeceğim HDD’yi çalıştırmaya yetiyor mu onlara bakacağım.

    < Bu ileti DH mobil uygulamasından atıldı >
  • Sanırım bazı UAS controller chipleri tam uyumlu çalışmıyor. Daha önce bu konu içinde aynı sorunu yaşayan arkadaşlar olmuştu. ASM 1153e chipset ile sıkıntı yaşayan bir arkadaş vardı. Eğer aynı chipset ise şu yazıya bir bakın.
    bugs.openwrt.org
    FS#1862 : not working xhci-mtk USB 3.0
    https://bugs.openwrt.org/index.php?do=details&task_id=1862

    < Bu ileti DH mobil uygulamasından atıldı >
  • whiskerry kullanıcısına yanıt
    usb 2.0 kablosu ile bağlayın. %90 Çalışacak.
  • -ForeverY- kullanıcısına yanıt
    Bildiğiniz bir link var mı acaba?

    < Bu ileti DH mobil uygulamasından atıldı >
  • whiskerry kullanıcısına yanıt
    Normal microusb kablolar ise year hocam resimdeki kablodan kullaniyorsaniz.

    < Bu ileti mobil sürüm kullanılarak atıldı >
  • -ForeverY- kullanıcısına yanıt
    aynen dediğiniz gibi çalıştı sıkıntı yok
  • Yağız hocamın desteği ve sabrı ile openwrt kurulumunu yaptık.
    Torrent indirirken download hızı 3mb/sn geçmiyor. hatta ortalamada daha düşük hızlar çıkıyor. aynı torrenti pc de ya da başka bir cihazdaki openwrt den indirdiğimde çok daha hızlı indiriyor.
    bu sorunun çözümünü bilen var mı?
  • Slm cihazdan satmak isteyen varsa pm bekliyorum

    < Bu ileti mobil sürüm kullanılarak atıldı >
  • Selamlar. ipad uzerinden banka uygulamalari veya herhangi uygulama da doubleclick sitesine yonlendiriliyorum. Sifirlamama ragmen temiz bir ipadde halen ayni sorunu aldim. Acaba modemle ilgili bir problem olabilir mi? Modemin firewall standart ayarında

    < Bu ileti mobil sürüm kullanılarak atıldı >
  • Routerı devre dışı bırakıp sadece modemle bağlandığında da aynı şey oluyor mu.

    < Bu ileti DH mobil uygulamasından atıldı >
  • quote:

    Orijinalden alıntı: CXath1

    Yağız hocamın desteği ve sabrı ile openwrt kurulumunu yaptık.
    Torrent indirirken download hızı 3mb/sn geçmiyor. hatta ortalamada daha düşük hızlar çıkıyor. aynı torrenti pc de ya da başka bir cihazdaki openwrt den indirdiğimde çok daha hızlı indiriyor.
    bu sorunun çözümünü bilen var mı?
    PADAVAN daha hızlı indiriyor, 100 Mbit Net var ilk 5 dk dan sonra 60 mb ile 90 Mb arasında indirme hızı değişiyor. anlık da olsa hızda drop olyor 30 kb vb ama hemen dropdan önceki hıza 50 60 Mbit geri dönüyor. ben ilk Breed Web arayüzünü yükledim router elime geçince, stock roma dönmesi OpenWrt ve PandoraBox vb. yüklemesi Prometheus ve Virtual Machine göre daha kolay geldi bana.



    < Bu mesaj bu kişi tarafından değiştirildi DenzeL_28 -- 2 Haziran 2019; 16:4:16 >
  • DenzeL_28 kullanıcısına yanıt
    Aria2 ile download yapmayı denediniz mi hiç.

    < Bu ileti DH mobil uygulamasından atıldı >
  • bende routera aria2 yükledim. cihazım 3 defa brick olmuştu ama aria2 yüzünden mi oldu emin değilim.
  • 
Sayfa: önceki 2021222324
Sayfaya Git
Git
sonraki
- x
Bildirim
mesajınız kopyalandı (ctrl+v) yapıştırmak istediğiniz yere yapıştırabilirsiniz.