Arduino mega 2560 TFT 2.8 sorunu

Merhaba arkadaşlar Günlerdir yırtınıp duruyorum ekranım arduino uno da normal Çalışıyor sorun yok

Ama mega 2560 ta görüntü alamadım

Kod ve resimler alta ekliyorum Kod ustaları bir zahmet el atarmısınız

Ve kodlarım

#include <ILI9486_SPI.h> //Hardware-specific library

#if (defined(TEENSYDUINO) && (TEENSYDUINO == 147))

ILI9486_SPI tft(/*CS=*/ 10, /*DC=*/ 15, /*RST=*/ 14);

// for my wirings used for e-paper displays:

#elif defined (ESP8266)

ILI9486_SPI tft(/*CS=D8*/ SS, /*DC=D3*/ 0, /*RST=D4*/ 2); // my D1 mini connection shield for e-paper displays

//ILI9486_SPI tft(/*CS=D8*/ SS, /*DC=D4*/ 2, /*RST=D3*/ 0); // my proto board for RPi display

#elif defined(ESP32)

ILI9486_SPI tft(/*CS=5*/ SS, /*DC=*/ 17, /*RST=*/ 16);

#elif defined(_BOARD_GENERIC_STM32F103C_H_)

ILI9486_SPI tft(/*CS=4*/ SS, /*DC=*/ 3, /*RST=*/ 2);

#elif defined(__AVR)

ILI9486_SPI tft(/*CS=10*/ 8, /*DC=*/ 10, /*RST=*/ 9);

#elif defined(ARDUINO_ARCH_SAM)

ILI9486_SPI tft(/*CS=10*/ SS, /*DC=*/ 6, /*RST=*/ 5); // my proto board

#elif defined(ARDUINO_ARCH_SAMD)

// mapping suggestion for Arduino MKR1000 or MKRZERO

// note: can't use SS on MKR1000: is defined as 24, should be 4

// BUSY -> 5, RST -> 6, DC -> 7, CS-> 4, CLK -> 9, DIN -> 8 // my e-paper connector

ILI9486_SPI tft(/*CS=*/ 4, /*DC=*/ 7, /*RST=*/ 6); // to my proto board

#else

// catch all other default

ILI9486_SPI tft(/*CS=10*/ SS, /*DC=*/ 8, /*RST=*/ 9);

#endif

#if !defined(ESP8266)

#define yield()

#endif

#define BLACK   0x0000

#define BLUE    0x001F

#define RED     0xF800

#define GREEN   0x07E0

#define CYAN    0x07FF

#define MAGENTA 0xF81F

#define YELLOW  0xFFE0

#define WHITE   0xFFFF

void setup() {

 Serial.begin(9600);

tft.setSpiKludge(false);

tft.init();

tft.fillScreen(RED); tft.setRotation(1); tft.setTextColor(WHITE);  tft.setTextSize(4);

tft.setCursor(30, 30);  tft.setRotation(1);

  tft.setTextColor(WHITE);  tft.setTextSize(2);

tft.drawLine(10, 10, 60, 60, WHITE);

tft.drawFastHLine(30, 20, 40, WHITE);

tft.drawRect(50,50, 80, 100, WHITE);

tft.fillRect(200, 150, 100, 60, BLACK);

tft.fillCircle(200, 100, 30, GREEN);

tft.drawTriangle(40, 5, 40, 60, 70, 60, BLACK);

tft.fillTriangle(70, 70, 20, 200, 90, 50, YELLOW);

tft.drawRoundRect(400, 150, 60, 10, 20, BLUE);

tft.fillRoundRect(100, 150, 60, 50, 20, BLUE);  

pinMode(A0,INPUT);            

}

void loop() {

float X=analogRead(A0);

tft.setCursor(300, 130);

tft.setTextColor(WHITE);

tft.setTextSize(2);

tft.setRotation(1);

tft.println(X,1);

delay(100);

//tft.init(X);

}